HP graphite electrode 350mm

HP graphite electrode 350mm is used in a high-power smelting furnace and a low-load to medium-load ladle furnace. Electric arc furnace steelmaking is to introduce current into the steelmaking furnace through electrodes, and the strong current passes through the gas at the lower end of the electrode to generate arc discharge. Then heat generated by the arc is used for eaf steelmaking. It is suitable for High-power electric furnaces with high power, high voltage, and short angle.

Graphite electrode nipple is important for connecting electrodes in industrial EAF steelmaking processes. They conduct electricity, allowing current to flow through the electrodes. Graphite electrode nipple is available in various diameters and lengths, with the size and shape of the fitting depending on the application. The nipple must be carefully inspected for damage or wear and replaced if necessary. When the graphite electrode leaves the factory, the surface needs to be processed, and the two ends are turned into nipple holes with trapezoidal threads. Each electrode is equipped with a nipple.